Preparation for Recalling Diagnostic Trouble Code Memory

Preparation for recalling diagnostic trouble code memory

1. Connect impulse counter and adaptor for impulse couter scan tool to [1][2]diagnostic connector (X11/4) according to connection diagram. DM (Diagnostic Module)

Note:
Connect impulse counter scan tool as follows:
red wire Socket 3
black wire Socket 1
yellow wire to:
Diagnostic module Socket 19
Base module Socket 8
LH-SFI control module Socket 4
Ignition control module Socket 17
EA/CC/ISC control module Socket 7

2. Recall control module diagnostic trouble code memory and clear stored diagnostic trouble codes.

Special Tools: