Preparation for Recalling Diagnostic Trouble Code Memory

Preparation for recalling diagnostic trouble code memory

1. Connect impulse counter and adaptor for impulse couter scan tool to diagnostic connector (X11/4) according to connection diagram. DM (Diagnostic Module)

Note:
Connect impulse counter scan tool as follows:
red wire Socket 3
black wire Socket 1
yellow wire to:
Left LH-SFI control module Socket 5
Right LH-SFI control module Socket 4
Left ignition control module Socket 18
Right ignition control module Socket 17
Base module Socket 8
EA/CC/ISC control module Socket 7
Diagnostic module Socket 19


2. Recall control module diagnostic trouble code memory and clear stored diagnostic trouble codes.

Special Tools: