Impulse Counter/On-Off Ratio Tester (With X11 Socket)

CONNECTION DIAGRAM - Impulse Counter Scan Tool and On-Off Ratio Tester or Engine Analyzer with Diagnostic Socket X11




012 On-off ratio tester
013 Impulse counter scan tool
075 Impulse counter scan tool adaptor
X11/2 Left diagnostic socket (9-pole)
X11/3 Right diagnostic socket (9-pole)
X11/4 Data link connector (diagnostic trouble code (DTC) readout)

NOTE:
Connect red wire of impulse counter scan tool to socket 3, black wire of impulse counter scan tool to socket 1, yellow wire of impulse counter scan tool as follows:

Left LH-SFI control module Socket 5
Right LH-SFI control module Socket 4
Left ignition control module Socket 18
Right ignition control module Socket 17
Base module Socket 8
EA/CC/ISC control module Socket 7
Diagnostic module Socket 19