Special Tool - Frame Straightening Equipment

Date: June, 2000

Order No.: P-SI-58.40/71A, 60.10/10

Supersedes: MBNA 58/71 (February 1994)

Group: 58, 60

Revision:
Revised for change in rear suspension mounting point fixtures

SUBJECT:
MODEL 129
DEDICATED STRAIGHTENING EQUIPMENT FOR COLLISION REPAIR





A dedicated fixture set from Celette, used for collision repair, is available for model 129 (Figure 1).








Complementary sets 429.308 (Figure 2) and 429.307 (Figure 3) are required in addition to the base set 429.300.

Complementary set 429.308 is used in conjunction with base fixture set 429.300 with model 129, with V-12 engine (129.076). Set includes two front cross member outer fixture brackets.

Complementary set 429.307 is used in conjunction with base fixture set 429.300 with model 129. This set is required for vehicles produced from chassis end number A161739. Set includes two of (# 84) and (# 85).

These sets are now available through the MBUSA Standard Service Equipment Program (1-888-458-4040).





Ordering Information:

See the MBUSA Standard Service Equipment Program Catalog for ordering instructions (1-888-458-4040).