Engine: Application and ID

Engine Code 104.941
Compression 10.5:1
Displacement 3606 cc
Output 206 kW @ 5750 RPM





AMG Information
Cylinder bore diameter for the AMG C36 has been increased to 91.0 ± 0.015 mm.
Repair size is increased to 91.5 ± 0.015 mm
An AMG engine No. (AMG 36 plus a four digit number) is stamped into the crankcase near the existing MBAG engine number.
A flange is installed in the crankcase to mount the oil spray nozzles.

Standard Information
Replacement crankcases and short blocks do not have a stamped engine model designation and engine number.

The workshop performing repairs must stamp the engine model designation in the crankcase in the space provided for the engine number (arrow) on me right in front of the engine support to enable the engine of the vehicle to be properly identified (e.g. by vehicle inspection authority after vehicle has been laid up or by Customs if vehicle is exported etc.).

Example: 104.941 (engine model designation in model 202.028).





The engine compression ratio (E) is stamped after the engine number.





Since January 1991 crankcases with additional bearing seat openings on the side (1) have been used as standard. This improves the pressure distribution in the crank chamber.