Preparation For Test

Primary Work:
- Perform Diagnosis, check Diagnostic Trouble Code (DTC) Memory. Diagnostic Trouble Code (DTC) Memory (CF) - Section 12

Preparation for Test:
1. Fuse F4-1, F4-2, F4-3, F4-4 and F1-22 ok,
2. Battery voltage 11 - 14 V.
3. Disconnect battery ground cable prior to connecting or disconnecting any electrical connector to the combination control module (N10-1) (to prevent the storing of erroneous diagnostic trouble codes).
4. Electrical wiring diagrams.







Special Tools

Conventional Tools, Test Equipment
Description Brand, model, etc:
Multimeter 1) Fluke models 23, 83, 85, 87

1) Available through the MBNA Standard Equipment Program





Connection Diagram - Socket Box (Part 1 of 2)

Figure 1:
001 Vehicle harness
003 Multimeter
050 Socket box (126-pole)
078 Test cable 210 589 01 63 00
N10-1 Combination control module





Connection Diagram - Socket Box (Part 2 of 2)

Figure 2:
A37 PSE control module, combined functions
001 PSE connector
002 Test cable set
003 Multimeter
004/050 Socket box