Preparation For Test - Section 22

1. Check fuses F2-5, F4-3 and F4-11.
2. Battery voltage 11 - 14 V.
3. Provide access to PSE control module (A37, A37/1).
4. Connect socket box with test cable according to connection diagram.

NOTE: After completion of testing, erase the PSE control module's diagnostic trouble code (DTC) memory, see Connection and Use of Test Equipment.

Special Tools:

Equipment
Multimeter 1) Fluke models 23, 83, 85, 87

1) Available through the MBNA Standard Equipment Program.


Connection Diagram - Socket Box





001 PSE control module connector
002 Test cable
003 Multimeter
004/050 Socket box (35-pole)
A37, A37/1 PSE control module