Automatic Transmission/Transaxle: Technical Service Bulletins

• Customer Interest
  • A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM
• All Technical Service Bulletins
  • A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM
  • A/T - Choosing the Right ATF
  • A/T - Math Part II
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Front Bushing Wear
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - How To Use A Pressure Gauge
  • A/T - Engine Vacuum Testing
  • A/T - Special Piston Removal/Installation Tool
  • A/T - (Exchange) Piston Bore Seal Modification
  • A/T - Piston Removal/Installation Tool
  • Delayed 2-3 Upshift After Cold Start
  • No Fifth Gear/Trans. Only Shifts to Fifth at Full Load
  • A/T - No 2-3 Upshift at Full Throttle/Engine Cutout
  • A/T - Harsh Shifts into D & R/Chattering out of D & R
  • Transmission Does Not Shift into Fourth Gear
  • Intermittent No Fifth/Erratic Fourth to Fifth to Fourth
  • Maintenance - Factory Approved Service Products
    • Overview
    • General Information
    • Engine Oil
    • Other Lubricants and Fluids
    • Fuel Requirements
      • 1. Gasoline Engines
      • 2. Diesel Engines
  • A/T - Intermittent Power Delivery in Reverse
  • ATF & Parking Lock - Cautions
  • A/T - Double Engagement When Shifted Into Drive
  • Engine Dies When Transmission is Put Into Gear
  • Transmission Slips When Setting Off in First Gear
  • Hard 4-3 Downshift at Approximately 60-70 km/h
  • A/T - Transmission Slips Starting Off in 1st Gear
  • A/T - Removing Brake Band B2
  • Harsh 4-2/3-2 Kickdown and Full Throttle Downshift
  • Transmission Controls - Control Module Flashing Info.