Main Bearing Cap Torque

Tightening torque

Nuts
M8x1: 30 Nm
M10x1: 50 Nm

Side bolts
M8x60: 30 Nm






Tighten crankshaft bearing caps in the specified torque in the order of the tightening diagram. Oil the bolt thread and head and the contact surface of the nut.


Note: Pay attention to marking. 1 is to the front. The fit is off-centered, the crankshaft bearing caps can only be installed in one positions. Use bolts of quality 10.9 for the side bearing cap bolted connection.