AR20.00-P-1142-06GA Bleed Cooling System

AR20.00-P-1142-06GA Bleed Cooling System
-ENGINE 111, 605, 606 in MODEL 124
- except CODE (228) Stationary heater
-ENGINE 606.961 in MODEL 140
- except CODE (228) Stationary heater
-ENGINE 111, 604, 605 in MODEL 202
- except CODE (228) Stationary heater

1 Engines 605, 606 in model 210: open drain plug at cylinder head at the front left, pour in coolant, close drain plug when the coolant flows out.
2 Switch vehicle heating to maximum heating capacity and allow engine to warm up at average engine speed.
3 Refill the coolant continuously until the coolant level reaches the marking on the radiator filler opening or the coolant expansion reservoir.
4 At coolant temperature of about 60 to 70°C, close the filler opening on the radiator or coolant expansion reservoir with the plug.