A. Installation Preparation - All Configurations

A. Installation Preparation - all configurations

1. Read this bulletin in its entirety.

2. Unpack and compare the installation kit(s) contents against the Parts Information list at the end of this bulletin.

3. Place the operating guides/client accessories (i.e. chargers, cassette tapes, CD's, etc.) in the glove box or appropriate storage compartment.

4. Remove the trunk mat.

5. Open and remove the right rear compartment cover.

6. Remove the three (3) screws securing the sound system bracket, disconnect the sound system amplifier connector and remove the assembly.

7. Determine the number and sequence of the D2B components to be installed, then locate/configure all fiber optic cables for the configuration.

Note: Refer to S-SI-82.64/123, D2B Fiber Optic Configuration and Version Coding for proper handling and Configuration of D2B fibers.

8. Proceed to:

^ Section B for telephone installation.

^ Section G for CD changer installation.