I. Final Assembly and Function Test

I. Final Assembly and Function Test

1. Replace the trunk mat.

2. Program the telephone per S-SI-82.70/124, StarTAC Portable Telephone Programming.

3. Verify proper CD changer, telephone, and Voice Activation System (as applicable to equipment installed) operation per the following checklist.

CD Changer

- Disk 1~6 load and unload properly

- Magazine load and eject operate smoothly

- CD sliding door opens/closes properly

- Audio is clear and crisp

- First and last track on selected CD can be accessed

Telephone

- Handset dialing is functioning

- Head unit dialing is functioning

- Handset incoming/outgoing call audio is clear

- Hands-free incoming/outgoing audio is clear

- Automatic memory download is functioning (may be necessary to store a test number in the telephone handset for this feature to operate). After automatic download, stored numbers should be available for dialing from the head unit.

- Verify that the telephone mode is available in the ICM

- Verify operation of the steering wheel controls

Voice Recognition

- Verify that the VRM can be controlled by the PTT lever on the column

- Verify that the spoken instructions are functioning with a high recognition rate

- Verify that the VRM can control the telephone