Front Steering Knuckle

TIGHTENING SPECIFICATIONS

Steering Knuckle To Supporting Joint 125 Nm

NOTE: Thoroughly pack slot (arrow) of clamped joint with preservation wax part No. 000 986 33 70 10, or equivalent

Steering Knuckle Arm 80 Nm
Damper Strut (11) To Steering Knuckle As Follows:
- Screw In The Two New Micro-encapsulated Bolts Until The Damper Strut Makes Contact, DO NOT TIGHTEN YET
- Press Top Of Steering Knuckle Against Damper Strut Until It Makes Contact And Tighten Upper Bolt With Washers And New Self-locking Nut
Lower Self-Locking Bolts 110 Nm
Upper Bolt With Self Locking Nut:
- 12 x 1.5 mm 110 Nm
- 14 x 1.5 mm 200 Nm
Brake Guard 10 Nm