A. Installing Preparation - All Configurations

1. Read this bulletin in its entirety before starting.

2. Unpack and compare the installation kit(s) contents against the Parts Information list in this bulletin.

3. Place the operating guides/client accessories (i.e. chargers, cassette tapes, CD's, etc.) in the glove box or appropriate storage compartment.

4. Remove the trunk mat.

5. Determine the number and sequence of the D2B components to be installed, then locate and configure all fiber optic cables for the configuration.

Note:
Refer to S-SI-82.64/135, D2B Fiber Optic Configuration and Version Coding for proper handling and configuration of D2B fibers.

6. Proceed to:

^ Section B for telephone installation.

^ Section G for CD changer installation.