E. Version Coding

1. Connect the Star Diagnosis System (SDS) to the vehicle and perform the version coding outlined below.

2. Set the D2B ring configuration to match that of Figure 15 by using the path:

Control units > Information and communication > D2B - COMAND or Audio > Retrofitting of D2B components > F2: Restart optical ring > F2: Actual configuration of D2B components > F2: Continue > F3: Yes - To match actual with specified configuration > F2: Erase fault memory

Note:
The D2B ring configuration in Figure 15 is an example of a configuration including every component. Some installations will not include all the components shown in the example. If a component is not present, connect the preceding component to the component following the one not present.

NOTICE
DO NOT alter the configuration in Figure 15 to match the vehicle configuration. Failure to have the configuration match Figure 15 will result in erroneous system operation and/or intermittent malfunctioning of some or all components.

3. Version code the head unit for satellite radio (COMAND only):

Control units > Information and communication> D2B - COMAND or Audio > Control unit adaptations > Read coding and change if necessary > Configuration of components (not D2B) > Set "Satellite Radio" to INSTALLED

4. Check the DTC memory of all installed components and the head unit. Investigate and identify any present DTC(s). Once identified, correct the source of the DTC(s) and clear the DTC memory.

Note:
Powering up the newly installed system prior to version coding will set errors in the D2B ring configuration. Ignore these errors during the initial DTC check. If, after clearing the DTC(s), they return in the next step, a configuration error is present. Locate and correct the error.





5. Confirm no new DTC(s) are present in the D2B system group.