Audio System - Satellite Radio Installation: Overview
Date: March 2004Order No.: P-I-82.60/303
Supersedes:
Group: 82
Installation Instructions
SUBJECT:
MODEL 203.040/061/064/065/081/084
MODEL YEAR 2004
SATELLITE RADIO INSTALLATION
WARNING
Do not disconnect the negative battery cable. Extensive reprogramming requirements will otherwise be necessary. WIRING HARNESSES WILL BE ELECTRICALLY ACTIVE. IT IS THEREFORE NECESSARY TO EXERCISE EXTREME CAUTION WHILE EXECUTING THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN SEVERE VEHICLE DAMAGE. PERSONAL INJURY. OR DEATH FROM ELECTRICAL SHOCK. Keep the ignition and radio powered OFF through the final test.
D2B Notes:
^ Fibers easily damage-handle fibers with care to prevent cuts, nicks, abrasions, kinks, and crushing.
^ Minimum bend radius for fibers is 25 mm.
^ Fiber optics" ring configurations" must form a closed loop to function (i.e. couple the input of a component with the output of the preceding component).
^ Light enters the clear fiber (input) and exits the red fiber (output). Each active D2B connector must therefore contain one red fiber end and one clear fiber end.
^ The red fiber end is always on the chamfered side of the connector and the clear fiber end is always on the square side of the connector.
^ Fiber connections or couplings follow a clear-to-red logic. A connector or coupling never contains two like-color fiber ends.
^ Identify D2B cables by their orange, semi-rigid insulation.
Electromagnetic interference (EMI) from bundled vehicle electrical harnesses does not affect fibers.