Operation CHARM: Car repair manuals for everyone.
Home >> Mercedes Benz >> 2003 >> SLK 230 (170.449) L4-2.3L SC (111.983) >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> P Code Charts >> P0600 >> [16] CAN Message From Control Module N47-5 (ESP, SPS and BAS Control Module): CAN Signal Interruption >> Test 1: Engine Compartment CAN Test >> Test 4: Resistance Test of Engine Compartment CAN >> Test 4B: Test Terminating Resistor of Component X63/4 (CAN Databus Adapter Connector, 2-Pin)

Test 4B: Test Terminating Resistor of Component X63/4 (CAN Databus Adapter Connector, 2-Pin)



Test terminating resistor of component X63/4 (CAN databus adapter connector, 2-pin)

Test terminating resistor of component X63/4 (CAN databus adapter connector, 2-pin)

Test sequence
- Switch off ignition.
- Connect socket box to component N3/10 (ME-SFI control module).
- Unplug the socket 4 at component N3/10 (ME-SFI control module).
- (4.1) 86<-->87 (4.2)

Specified value
- Resistor [115...125]

Question: Is the measured value okay?

No
- The measured value is not o.k.
Possible cause and remedy
- Cable from component X63/4 (CAN databus adapter connector, 2-pin) to component N3/10 (ME-SFI control module)
- Component X63/4 (CAN databus adapter connector, 2-pin)
**End of test**

Yes
- The measured value is o.k.
**End of test**

pro multis · About Operation CHARM