Test 2: Test Internal Resistance of Component L5 (Crankshaft Position Sensor)

Test internal resistance of component L5 (Crankshaft position sensor)

Test sequence
- Switch off ignition.
- Connect socket box to component N3/10 (ME-SFI control module).
- Separate connector 3 from control unit N3/10 (ME-SFI control module).
- (3.13) 46<-->45 (3.12)

Specified value:
- Resistor: [600...1300]

Question: Is the measured value okay?

No
- The measured value is not o.k.
Possible cause and remedy
- Leads to component L5 (Crankshaft position sensor)
- L5 (Crankshaft position sensor)
**End of test**

Yes
- The measured value is o.k.
**End of test**