A. Installation Preparation

1. Read these installation instructions in their entirety before proceeding.

2. Unpack and compare the installation kit contents against the Parts Information list-Section G.

3. Open the trunk and remove the trim panel on the trunk lid underside.

^ See WIS document AR68.30-P-8150P, "Remove/install trunk lid paneling"

4. Remove the floor covering in the trunk.

5. Remove the plastic cover over the electronics compartment at the front of the trunk floor and the liner panel on the passenger side of the trunk interior.

^ See WIS document AR68.30-P-4600P, "Removing and installing paneling in trunk"

6. Cover the trunk floor to catch metal chips from drilling.