E2333
One or more signals sent from control unit N15/5 (Electronic selector lever module (ESM [EWM])) via the CAN bus is implausible.
Possible cause:
- A80 (Intelligent servo module for DIRECT SELECT)
Affected functions:
- CAN Communication
- Automatic transmission Function
-------------------------------------------------
Test 1: Fault in CAN communication with control unit N15/5 (Electronic selector lever module control unit).
Test 2: Fault in CAN communication with control unit A80 (Intelligent servo module for DIRECT SELECT).
1. Fault in CAN communication with control unit N15/5 (Electronic selector lever module control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING
- This is not a function error of control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) and does not justify replacement.
Possible cause for the entry of this event code
- Operational fault of component N15/5 (Electronic selector lever module control unit)
Possible measures
- Read out fault memory of control unit N15/5 (Electronic selector lever module control unit).
- Process displayed fault codes in control module N15/5 (Electronic selector lever module control unit).
End of test
2. Fault in CAN communication with control unit A80 (Intelligent servo module for DIRECT SELECT).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING
- This is not a function error of control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) and does not justify replacement.
Possible cause for the entry of this event code
- Operational fault of component N15/5 (Electronic selector lever module control unit)
Possible measures
- Read out fault memory of control unit N15/5 (Electronic selector lever module control unit).
- Process displayed fault codes in control module N15/5 (Electronic selector lever module control unit).
End of test