GF82.61-P-4001RJ Destination Guidance In Non-Digitalized MAP Area, Function

GF82.61-P-4001RJ Destination Guidance In Non-Digitalized Map Area, Function
- with CODE (498) Japan version


When traveling outside the digitized map area (e.g. company sites, multilevel car parks, tracks across fields, etc.), but still within the digital versatile disk (DVD) map limit, the navigation processor of the COMAND operating, display and control unit (A40/3) switches over to "navigation in the non- digitized map area". The message "OFF ROAD" appears on the COMAND operating, display and control unit (A40/3) display. If, in addition, the vehicle is outside the DVD map limits (outside the country), the message "OFF MAP" appears.

When entering the OFF ROAD mode, the road map and route information are shown on the display of the COMAND operating, display and control unit (A40/3).

In both cases, only basic position finding (dead reckoning) takes place. Basic position finding (dead reckoning) may be corrected on the basis of Global Positioning System (GPS) data if necessary. Limited navigation is accomplished by the following details only:
^ Distance from destination as the crow flies
^ Direction to destination (as arrow).

After reentering the digitized map area, the system automatically continues with "Destination guidance in digitized map area" . The GPS position is used to help determine the roads on which the vehicle could be located. During this process a slight delay in the route guidance may result.

If the message "OFF MAP" is displayed, comprehensive navigation can be continued after loading the DVD for the respective country.