Test 2: Test Current Consumption of Component Y49/3 (Camshaft Exhaust Solenoid)

Test current consumption of component Y49/3 (Camshaft exhaust solenoid).

Test sequence
- Switch off ignition.
- Connect socket box (126-pin) to component N3/10 (ME-SFI control module).
- Connect socket box (35-pin) to component N3/10 (ME-SFI control module).
- [F.2] 98 <--> 73 [M.72]
- Switch on ignition.

Testing of maximum power consumption may be conducted for no longer than 5 s.

Specified values
- Amperage [2...3] A

Question
Is the measured value okay?

NO
The measured values are not o.k.

Possible cause and remedy

- N10/1f54 (Fuse 54)
- Cable from component Y49/1 (Intake camshaft solenoid) to component N3/10 (ME-SFI control module)
- Y49/3 (Camshaft exhuast solenoid)

End of test

YES
The measured values are o.k.

End of test.