Test 1B.2: Test Current Consumption of Component Y58/1 (Purge Control Valve)

Test current consumption of component Y58/1 (Purge control valve).

Test prerequisite
- Actuation is not okay.

Test sequence
- Switch off ignition.
- Connect socket box.
- [F.4] 100 <--> 16 [F.46]
- Switch on ignition.

Specified value
- Amperage [0.3...0.5] A

Question
Is the measured value okay?

NO
The measured value is not o.k.

Possible cause and remedy
- Y58/1 (purge control valve)

YES
The measured value is o.k.

Further poissible causes of vault
- Perform mechanical inspection of component Y58/1 (ourge control valve).