GF82.70-P-5001FA UPCI Cell Phone Holder (Universal Cell Phone Interface), Component Description

GF82.70-P-5001FA UPCI Cell Phone Holder (Universal Cell Phone Interface), Component Description

MODEL 203.7
- with CODE (386) Mobile phone
MODEL 203.7 as of model year 09/Modification Year 08 model refinement package







A34/15 UHI portable CTEL holder (Universal Handy Interface)

Location
The cradle with inserted mobile phone is located under the armrest in the center console.

Task
- Connecting various mobile phones
- Receiving signals
- Transmitting signals

Connecting various mobile phones
The cradle can be used to connect different mobile phones to the mobile phone system.

Receiving signals
- Receiving the power supply via circuit 30g and circuit 31 via one direct line each
- Receiving the signals for switching on or off over a direct line from the UPCI [UHI] (Universal Portable Cell Phone Interface) control unit (N123/1)
- Receiving mobile phone signals and data over coaxial cable and the E-net compensator (A28/3) from the telephone/cell phone/STH radio remote control antenna splitter (A2/53), with code (228) Stationary heater
- Receiving mobile phone signals or data over coaxial cable and the E-net compensator from the telephone antenna A2/49a1), except code (228) Stationary heater

Transmitting signals
- Transmitting mobile phone signals and data from the mobile phone over coaxial cable and the E-net compensator to the telephone/cell phone/STH radio remote control antenna splitter, with code (228) Stationary heater
- Transmitting mobile phone signals and data from the mobile phone over coaxial cable and the E-net compensator to the telephone antenna, except code (228) Stationary heater

Variants
Depending on manufacturer.