AZ82.61-P-0012-01PP Retrofit Wiring Harness For Portable Navigation Unit

AZ82.61-P-0012-01PP Retrofit Wiring Harness For Portable Navigation Unit
- with CODE (523) MB Audio 20 radio
- with CODE (535) Audio 20 CD radio, USA
in conjunction with iPod




























1 Leave AUX cable of iPod connected to radio (A2) and strap down AUX cable of portable navigation unit.
The adapter wiring harness (1) must be routed and fixed in place in such a way as to prevent vibration and damage. The connection (x) to the multi-terminal block (5) must be in a location that allows the ashtray to be removed and installed at any time without problems. Insulate live multi-terminal block (5).

2 Insert connector (2) of adapter wiring harness (1) into slot in radio module connector (3).
Ensure that the connector (2) engages properly.

3 Connect adapter wiring harness (1) to wiring harness (4) of cigarette lighter.
Use multi-terminal block (5) to make connection. Connect black line of adapter wiring harness (1) to yellow/black line of cigarette lighter wiring harness (4) and brown line of adapter wiring harness (1) to brown line of cigarette lighter wiring harness (4).

4 Route adapter wiring harness (1) with connector (6) in rear area of installation opening from overhead operating unit in direction of center air outlet.

Connect TMC receiver
If present.






5 Disconnect antenna plug (7) from radio (A2).
6 Connect antenna plug to TMC receiver (9) "IN".
7 Connect provided antenna cable (8) to TMC receiver (9) "OUT" and radio (A2).
8 Connect TMC receiver (9) to adapter wiring harness (1).
9 Store TMC receiver (9) in rear area of radio installation opening.