AR83.25-P-1402P Remove and Install Water Collector

AR83.25-P-1402P Remove and install water collector

Danger! Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism

Remove/Install
Always remove ignition key when working on windshield wiper mechanism.



1. Remove wiper arm on both sides

2. Open engine hood and move to upright position.

3. Remove cover from front SAM control module with fuse and relay module (N10/1)

4. Open tie strap (1)

5. Expose lead (1a)

6. Remove lead (2a) from bracket (2) and expose

7. Remove lead (3a) from bracket (3) and expose

8. Disconnect connector from multi-function sensor convenience automatic air conditioning (B31)
- With CODE (581b) convenience automatic air conditioning

9. Unscrew bolts (5)

10. Unscrew screws (6)

11. Pull water collector (4) off of windshield frame
- Loosen water collector (4) from windshield frame with pulling hook (140 589 02 33 00) in direction of arrow.

12. Remove water collector (4)
- ensure correct seating of gaskets (7)

13. Install in the reverse order