GF82.70-P-3000PM Dialing, Function

GF82.70-P-3000PM Dialing, Function

MODEL 203.0 /2 /7 as of 24.4.04
- with CODE (813) Voice control system (VCS [SBS])
- up to Model Year 8
- Auswahl und Dialog mit der Telefonanlage

Function requirements:
- Subscriber identification module (SIM) card inserted
- Personal Identification Number (PIN) entered
- Network available
- Universal Portable CTEL Interface (UPCI) system, with code (388) "portable CTEL" for UPCI system, ready

After activating the voice control system (VCS) with the VCS switch (S93/2), the user has a number of possibilities for completing the desired call by using the following editing commands.
User editing commands for stored or non-stored numbers:
- Dial telephone number
- Dial number
- Dial name
- Read telephone book

User final commands:
- Dial
- Store

After activation has been completed and the user has spoken the editing command, e.g. "Dial number"or "Dial telephone number", the voice control system (VCS) requests the user to enter a telephone number by the voice output saying "Please say number".

If an error occurs when entering the desired telephone number, e.g., improper recognition of a number by the voice control system (VCS) or incorrect entry by the user, it is possible for the user to delete or correct the number.

If the number was entered without errors and recognized correctly by the voice control system (VCS), the final command "Dial" given by the user is confirmed by the voice control system (VCS) announcement "The number is being dialed" and the connection is established. If the user would like to have the desired phone number permanently available after entering it successfully, then instead of the final command "Dial" the final command "Store" must be spoken. Thereupon the voice control system (VCS) requests the user to enter the desired name through the spoken announcement "Please say name". After this has been entered by the user, the voice control system (VCS) requests the user to repeat the name as confirmation. Then the number and the associated name are stored in the telephone book, indicated by the spoken announcement "Name and number have been stored".

The entries stored in the telephone book can only be called up reliably by the users who store them.

The editing command "dial name" can be used to request a name that is already stored in the telephone book. The voice control system (VCS) asks the user to enter the desired name.

The editing command "Read telephone book" can be selected to have the telephone book read out by the voice control system (VCS), in order to press the VCS switch (S93/2) when the desired name is being read out. With this command it is therefore possible to "scroll" through the telephone book.

The editing command "Read telephone book" can also be used when the voice control system (VCS) is having difficulties in recognizing a name desired by the user via a spoken input. If it is already in the telephone book, the name can then be selected and thus the connection established.

With the two dialing options listed here, the final command "Dial" is not needed. After the name has been repeated by the voice control system (VCS), the user is informed by the voice output feature that the "number is being dialed" and that the connection is established.

If, with the dialing options listed, the desired number is not available (e.g., the desired connection is busy), the user then has the option of redialing the number dialed last after terminating the dialing procedure and reactivating the voice control system (VCS) with the editing command "Redial".

During the particular dialing options, it is possible at any time to terminate the dialogue with the voice control system (VCS) either by pressing the VCS switch (S93/2) or spoken input "Terminate" by the user.

If the voice control system (VCS) system has performed a faulty recognition or the user has made a wrong entry, then this number can be corrected with the following commands using 3 methods:
- Delete
- Delete number
- Delete telephone number

This means that all numbers entered previously are deleted and that the voice control system (VCS) outputs a message to the user via voice output indicating "Number deleted, please say number or command" and requesting to enter additional digits or commands.

It is also possible to establish international calls via the voice control system (VCS). In addition to this, it is also possible to control announcement services or to operate the mailbox.

Help feature
The VCS contains a help feature in order to be able to render its operation as simple as possible. If the user is in dialogue mode with the telephone and says the word "Help", the voice control system (VCS) reads the most important telephone commands aloud. If the user is in dialogue mode with the navigation system, they can say "Help Telephone" and change from the navigation system to the Universal Portable CTEL Interface (UPCI) system, with code (388) "portable CTEL" for UPCI system and the voice control system (VCS) reads out the most important telephone commands