I. Mounting the Linear Compensator to the Bracket, Connecting Linear Compensator, Install the Bracket Assem.

1. Mount the linear compensator to the bracket with three M4 x 6 Phillips head machine screws (Figure 22).





2. Place the linear compensator/bracket assembly within reach of its cable connectors (Figure 23).

3. Connect the FAKRA antenna male connector to the linear compensator jack labeled "PORTABLE" (A, Figure 23).

4. Connect the FAKRA antenna female connector to the linear compensator jack labeled "ANTENNA" (B, Figure 23).

5. Connect the power supply connector to the linear compensator (C, Figure 23).





6. Mount the linear compensator/bracket assembly behind the reinforcement panel facing the tension spring for the trunk lid with three MS Phillips head machine screws (Figure 24).