Body - Front/Rear Door Window Glass Rattles

Date: March 12, 2007

Order No.: P-B-72.00/78

Supersedes:

Group: 72

SUBJECT:
Model 219.372/375/376/377, Up to VIN A103724

Power Windows Are Loose / Noisy














If you receive customer reports in the above model vehicles of a rattling noise in either the front or rear window glass area, which may occur when the door is closed or when the vehicle is driven over a rough road surface, the mounting nuts (Figures 1-4) of the window guide rail may have come loose causing the window glass to rattle. To resolve, perform the following procedure.

1. Remove the door panel trim. Refer to WIS documents AR72.10-P-1000TX (front door) and AR72.12-P-1010TX (rear door).

2. Carefully peel back the door vapor barrier to expose the guide rail mounting nuts.

3. Replace mounting nuts of the window guide rail one nut at a time with new self-locking nut (part no. A001 990 58 50) (Figure 1-4). Torque to 10 Nm.

4. Perform power window glass adjustment. Refer to WIS documents AR72.10-P-1950TX (front door) and AR72.12-P-1950TX (rear door).

Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair.





Special Tools





Parts Information





In Case of Warranty, use the table.