GF82.30-P-3002TM Back-Up Wiping, Function

GF82.30-P-3002TM Back-up Wiping, Function

Component Identification:

Function requirements:
^ C. 15R On
^ Windshield wiper in operation

Function
When engaging the reverse gear, the rear-end door wiper system is actuated depending on the position of the rear-end door wiper switch and the combination switch:

2nd ring of combination switch in position "0":
^ Intermittent wipe with an intermission rate of 5 s

2nd ring of the combination switch in position "I":
^ Wiper control synchronous to front windshield wiper (Continuous wiping or rain sensor mode)

Switching off rear wiper system
The rear window back-up wiping function is switched off either if there is no more backup signal or if the front windshield wiper is switched off.