GF82.70-P-0007-05RI Mobile Phone System, Establishing Connection to Mobile Phone Subscribers

GF82.70-P-0007-05RI Mobile Phone System, Establishing Connection To Mobile Phone Subscribers
- with CODE (528) COMAND with DVD changer
- with CODE (512) COMAND APS with DVD changer

Component Identification:

Function requirements
^ Status "Circuit 30 ON" or "Circuit 15R ON"
^ One mobile phone network is available in sufficient strength and quality
^ Mobile phone system operating error-free
^ Mobile phone and COMAND operating, display and controller unit (A40/3) switched on
^ Enabled Subscriber Identification Module (SIM) card inserted in mobile phone
^ Compatible mobile phone inserted into UPCI [UHI] cell phone holder (Universal Portable Cell Phone Interface) (A34/15), which is connected to Bluetooth module (A34/7) (comfort telephony) or Bluetooth-capable mobile phone in vehicle and authorized at the COMAND operating, display and controller unit (basic telephony)
^ Correct Personal Identification Number (PIN) entered, if set on the mobile phone

In order to be able to operate a mobile phone in the vehicle that has Bluetooth capability and is authorized at the COMAND operating, display and controller unit, the mobile phone must support Hands Free Profile (HFP) 1.0 or 1.5. More information is available under:
- www.mercedes-benz-mobile.com

General
Cellular mobile telephone subscriber A has logged into the mobile telephone network through his/her mobile service switching center, and cellular mobile telephone subscriber B has logged into the mobile telephone network through his/her mobile service switching center B and both are registered in their respective home location register. Now both mobile phone subscribers can call each other via the following communication route:
- Mobile phone
- Base transceiver station
- Base station controller
- Mobile service switching center or mobile service switching center B

However, if cellular mobile telephone subscriber A or cellular mobile telephone subscriber B log into the mobile telephone network outside of the reception area of their mobile service switching center or mobile service switching center B, then both are entered into the visitor location register of the nearest mobile service switching center by the nearest base transceiver station and base station controller.

The nearest mobile service switching center automatically contacts the responsible home location register of the mobile service switching center for cellular mobile telephone subscriber A or the mobile service switching center B for cellular mobile telephone subscriber B and signals the present location of cellular mobile telephone subscriber A or cellular mobile telephone subscriber B.

If mobile phone subscriber A wants to call mobile phone subscriber B, he/she enters the subscriber's telephone number. On the basis of this telephone number, the present location of cellular mobile telephone subscriber B can be determined by his/ her mobile service switching center B. With the information on the location, the mobile phone system then transfers the call from mobile phone subscriber A to mobile phone subscriber B via the best communication route.

The mobile phone system also automatically searches for the most favorable communication route during a phone call in order to minimize transmission losses.
The transmission route in the mobile telephone network consists of the following:
- Mobile phone
- Base transceiver station
- Base station controller
- Mobile service switching center or mobile service switching center B