GF82.70-P-2005RA Telephone Switch-On/Off Characteristics (D-Network), Function

GF82.70-P-2005RA Telephone Switch-On/Off Characteristics (D-network), Function
- with CODE (853) MB standard telephone


Switching D2B telephone on and off
The D2B telephone status in the D2B ring depends entirely on the status of circuit 15 (ignition ON/OFF). Information on the status of circuit 15 is transferred to the D2B telephone transmitter/receiver (A35/13) by the head unit (COMAND/radio) via the D2B ring. The D2B telephone transmitter/receiver (A35/13) is connected to circuit 15 and is switched on or off when a command is received from the head unit via the D2B ring or an external wake-up line. After switching off the ignition, the D2B telephone transmitter/ receiver (A35/13) and therefore the telephone remains switched on for a shut-off delay time of t=10 min and is then switched off. It is not possible to program any other shut-off delay time.

System characteristics
The D2B telephone transmitter/receiver (A35/13) has 3 operating states.
- Power-down mode
The D2B telephone transmitter/receiver (A35/13) is switched off except for the external wake-up line.

- Idle mode or shut-off delay mode
The remaining components of the D2B ring are shut off, only the D2B telephone transmitter/receiver (A35/13) remains active for t=10 min after switching off the D2B ring (ignition OFF). Pressing any key during the shut-off delay time increases the shut-off delay time by t=60 min.

- Active mode
The D2B telephone transmitter/receiver (A35/13) as well as the remaining components of the D2B ring are active and available to the user.

Switch-on operation
1. Current status: Ignition ON, D2B telephone transmitter/ receiver (A35/13) in inactive state (power-down mode), telephone system not ready for operation.
The D2B telephone transmitter/receiver (A35/13) goes to the active mode when:
- the telephone is switched on at the handset
- a call is made or received with the telephone switched on
- a wake-up signal from another D2B ring subscriber is recognized via the external wake-up line

2. Current status: Ignition OFF, D2B telephone transmitter/ receiver (A35/13) (idle mode) and D2B in shut-off delay phase ring in inactive state (shut off)
The D2B telephone transmitter/receiver (A35/13) goes to the active mode when:
- a call is made or received with the telephone switched on
- a wake-up signal from another D2B ring subscriber is recognized via the external wake-up line

Switch-off operation
The D2B telephone transmitter/receiver (A35/13) is in the shutoff delay phase (idle mode) and the D2B ring is switched off.

The following cases are possible depending on the status of circuit 15:
- Circuit 15 ON
After expiration of the shut-off delay time of t=10 min (no buttons pressed on telephone within the shut-off delay time) the D2B telephone transmitter/receiver (A35/13) switches off (power-down mode). In this case, the status of the telephone does not change, meaning when the telephone is switched on, it remains switched on and is not switched off D2B telephone transmitter/receiver by the (A35/13).

- Circuit 15 OFF
After expiration of the shut-off delay time of t=10 min (no buttons pressed on telephone within the shut-off delay time) the D2B telephone transmitter/receiver (A35/13) switches off (power-down mode). In this case, the status of the telephone changes, meaning, a switched on telephone is switched off.

The shut-off delay time for the portable cellular telephone can be changed by an entry on the SIM card (0-60 min). For this purpose, the desired time can be entered in the same manner as a telephone number under the menu point "SHUT-OFF DELAY TIME".

When the D2B ring is deactivated, the D2B telephone transmitter/receiver (A35/13) is switched off when the telephone is not switched on.