GF54.30-P-0002-05LEH Instrument Cluster (IC), Operating Information

GF54.30-P-0002-05LEH Instrument Cluster (IC), Operating Information

Operating instructions
Various menu levels can be displayed in the multifunction display of the instrument cluster using the left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111)A1p13A1:
- It is possible to scroll in the vehicle menus using the system selection button (S110s3).
- It is possible to scroll in the submenus or lists within a menu using the scroll forward and back button (S110s1).
- It is possible to switch from the menu or submenu to the next menu level up using the "Back" and VCS Off button (S110s4).
- The OK button can be used to confirm the corresponding selection or pending messages (S110s6).

All the buttons of the multifunction steering wheel button group are always fitted. Activation of the corresponding functions however depends on the equipment installed in the vehicle.

Overview of available menus (equipment-dependent):
^ "Trip" menu
^ "Navi" menu
^ "Audio" menu
^ "Telephone" menu
^ "Assistance" menu
^ "Service" menu
^ "Adjustments" menu

"Trip" menu
The following functions can be selected in the "Trip" menu:
- Standard display
- Hybrid operating display
- Trip computer "After start"
- Trip computer "After reset"
- Current consumption display and range
- Digital speedometer

"Navi" menu
Navigation notes are displayed in the "Navi" menu when the function is switched on.
When the function is switched off the direction of travel with compass bearing is displayed (e.g. "Direction of travel NW").

The navigation function is switched on or off via the COMAND controller unit (A40/3).

"Audio" menu
The following functions can be selected in the "Audio" menu:
- Select radio station
- Operate CD player/CD changer/DVD changer/DVD audio/MP3
- Operate DVD video
- Operate TV (with code (864) Rear entertainment system)

The audio source (e.g. radio or CD) can only be selected at the COMAND controller unit.

"Telephone" menu
When the function is switched on the name of the selected mobile telephone network is displayed in the "Telephone" menu. It is still possible then to scroll through the stored telephone book and select an entry. When the function is switched off the text "Telephone Off" is displayed.

The telephone function is switched on or off via the COMAND controller unit. If no mobile phone is recognized when the function is switched on, the message "Ready for Bluetooth telephony" appears.

"Assistance" menu
Depending on equipment installed, adjustments can be performed in the following menus/systems in the "Assistance" menu:
- "Speed. Limit-Asst." (with code (513) Speed Limit Assist)
- "Distance graphic" (with code (233) DISTRONIC PLUS)
- "ESP"
- Activate PRE-SAFE brake (with code (233) Distronic Plus)
- "Blind Spot Assist" (with code (234) Blind Spot Assist)
- "Lane Keeping Assist" (with code (476) Automatic lane recognition)

"Service" menu
The following functions can be selected in the "Service" menu:
- "Messages" (with number of stored fault messages or warning messages)
- "Tire pressure" (with code (475) Tire pressure monitor (Premium)) (e.g. inquiry about current tire pressures) "ASSYST PLUS" (e.g. display of remaining distance until next service)

"Adjustments" menu
Changes to the following adjustments can be performed in the "Adjustments" menu:
- "Daytime running lights"
- "Intell. Light System"
(with code (621) Intelligent Light System (left-hand traffic) or code (622) Intelligent Light System (right-hand traffic))
- "Adapt. high beams assist."
(with code (608) Adaptive Highbeam Assist)
- "SPEEDTRONIC"
- "Additional speedo"
- "Units"
- "Radar sensor system" (with code (233) DISTRONIC PLUS)