GF07.61-P-2005MOR ME-SFI Driving Mode, Function

GF07.61-P-2005MOR ME-SFI Driving Mode, Function
- ENGINE 275.9 in MODEL 230.4 as of Model Year 2009 /AEJ 08 MOPF

Function requirements for driving mode, general points
- Circuit 87M ON (engine control ON)
- Engine running

Driving mode, general points
The following partial functions are active in driving mode and are described in the following documents:
- ME fuel supply, function
- ME-SFI injection regulation, function
- Motor electronics (ME) ignition system, function
- ECI ignition system, function
- ME-SFI start, post-start phase and warm-up enrichment, function
- ME-SFI alternator interface function
- ME engine speed signal, function
- ME-SFI maximum engine speed limitation, function
- ME-SFI limiting maximum vehicle speed, function
- ME-SFI safety fuel shutoff, function
- ME-SFI lambda control, function
- ME-SFI two-sensor control, function
- ME oxygen sensor heater function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis, function
- ME thermal management, function
- ME engine torque requests function
- ME-SFI overrun fuel shutoff, function
- ME-SFI transmission shift delay, function
- ME knock control function
- Overheating/pinging protection, function
- Boost pressure control, function
- Deceleration air function
- Charge air cooling system, function
- Air injection, function
- ME-SFI electronic accelerator, function
- Electronic accelerator pedal emergency running mode, function
- Purging function
- Monitoring catalytic converter efficiency, function