GF27.19-P-1114AHK Internal Transmission Speed RPM Sensor, Component Description

GF27.19-P-1114AHK Internal transmission speed rpm sensor, component description
- Transmission 722.904/906/907/999

Component Identification:

Location
The internal rpm sensor (VGS) is positioned on the electric controller unit (VGS).

Task
The internal rpm sensor (VGS) detects the speed of the sun gear of the Ravigneaux gear set using the external plate carrier of the K1 multidisk clutch. This is processed by the fully integrated transmission control unit (VGS) (Y3/8n4) as an input signal together with the information from the turbine speed sensor (VGS) and the output speed sensor (VGS). This contributes to shortening the reaction time during shift operations.

Design
The internal speed sensor (VGS) is firmly fixed to the electric controller unit (VGS) and cannot be replaced individually.

Function
A permanently magnetized pole wheel (cylinder flange with integrated ring magnet) and the internal speed sensor (VGS), which consists of magneto resistive elements, are used to record the internal transmission speed. A magneto resistive element changes its resistance under the influence of a magnetic field. The cylinder flange with integral ring magnet is connected to the ring gear of the rear single planetary gear set. Magnetic field changes occur due to the rotary motion of the ring gear and as a result a resistance change occurs in the magneto resistive elements An electronic analysis system transmits this information to the fully integrated transmission control (VGS) control unit. By using this speed recording system the measurement can take place over a greater distance than with the Hall sensor.