Operation CHARM: Car repair manuals for everyone.

GF82.60-P-5000CE Media Interface Control Unit, Component Description



GF82.60-P-5000CE Media Interface Control Unit, Component Description
- with CODE (518) Media interface


Component Identification:






Location
In model 204.0/2, the media interface control unit is located behind the glove box.


Component Identification:






Location
In model 204.9, the media interface control unit is located behind the glove box on the crossmember.

Depending on the equipment installed one of the following control units will be installed, hereafter referred to as the "audio unit":
- Radio (A2), with code (523) MB Audio 20 radio or with code (510) Audio 20 with CD changer
- Radio with auto pilot system (A2/56), with code (525) MB Audio 50 APS radio or with code (511) Audio 50 APS with DVD changer
- COMAND controller unit (A40/3), with code (527) COMAND APS with single DVD drive (with navigation) or with code (512) COMAND APS incl. DVD changer

Task
^ Receive signals
^ Transmitting signals

Receive signals
^ Direct lines
^ Media Oriented System Transport (MOST)

Direct lines
- Power supply, circuit 31 and circuit 30g via G+H connector
- Audio signals and data via the media interface electrical connector (X18/67) and Mitsumi CAM62 connector
- Electronic wake-up for MOST over G+H connector

MOST
- Control signals from the "audio equipment" via the Media Oriented System Transport (MOST) 2+0 connector

Transmitting signals
^ Direct lines
^ MOST

Direct lines
- Power supply to the media interface electrical connector in general and via the Mitsumi CAM62 connector for USB
- Control signals to media interface electrical connector via the Mitsumi CAM62 connector

MOST
- Audio signals and data from "Audio equipment" over Media Oriented System Transport (MOST) 2+0 connector