Campaign - Update Engine Control Module Software

FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2011060003, June 2011

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: Model 172, Model Year 2012
Update Engine Control Module Software

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the Engine Control Module software may not meet current specifications. Dealers will update the software of the Engine Control Module.

This Service Campaign affects dealer inventory only. Please perform this Service Campaign on dealer inventory prior to retail.

Prior to performing this Service Campaign:

^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.

^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 517 vehicles are affected.

Procedure

Note:
^ Use DAS/xentry 05-06/2011 with Add-On 1825 or higher.

^ Follow the steps exactly as described in DAS/xentry.

^ Connect battery charger

1. Connect Star Diagnosis to vehicle.

2. Install software for ME-SFI [ME]:
Control unit view/ME/Adaptations/Control unit programming.

3. Follow on-screen instructions.

Note:
After updating software ME software version should be VC8_2_2.

Note:
The following allowable labor operation should be used when submitting a warranty claim for this repair:





WARRANTY INFORMATION