61 62 062 Removing and Installing/Replacing Left Rear Window Wiper Motor

61 62 062 - Removing and installing/replacing left rear window wiper motor





Necessary preliminary tasks:
- Remove wiper arm for rear window wiper 61 62 032 Removing and Installing/Replacing Wiper Arm on Rear Window (Left)
- Remove trim panel on splitdoor





Disconnect plug connection (1).
Release wiring harnesses from attachment points (3).
Release screws (2). Tightening torque 61 21 2AZ .
Detach rear window wiper motor (4) from grommet in splitdoor.

Installation:
- Check grommet of wiper shaft for signs of damage, replace if necessary
- Make sure grommet and spacer sleeves (5) are correctly seated on splitdoor and on rear window wiper motor (4) respectively