51 43 002 Removing and Installing Rear Left or Right Side Trim Panel

51 43 002 Removing and installing/replacing rear left or right side trim panel

Necessary preliminary tasks:
- Remove lower partition trim panel
- Remove B-pillar trim panel

Unclamp cover (1) and remove.
Release screw (2) on end fitting.
Tightening torque 72 11 04AZ.

Release screw (1) on seat belt deflection.
Tightening torque 72 11 03AZ.

Release screws (1) and guide cover (2) over seat belt (3).
Tightening torque 72 11 17AZ.

Release latch mechanisms (1) and feed out cover (2) from seat belt (3).

Release screws (2) on side trim panel (1).
Tightening torque 51 43 04AZ.
Release side trim panel (1) at clamps (3).

Lever out expanding rivet (1).
Release side trim panel (2) at clips (3).
Remove side trim panel (2) toward the inside and feed out seat belt.

Installation note:
Following parts of side trim panel (1) must not be damaged or missing: