51 71 412 Removing and Installing/Replacing Rear Spoiler

51 71 412 Removing and installing/replacing rear spoiler







Necessary preliminary tasks:
- Remove trim for rear lid







Unlock plug connections (1) and disconnect.
Loosen drain hose from water drain channel (2).

Installation note:
Make sure the drain hose and water drain channel (2) are securely seated and leak tight.







Loosen retainers (1).
Lift out plugs (2).







Undo nuts (1) and remove rear spoiler upwards.
Tightening torque 51 71 11AZ.







Installation note:
Attach retainers (2) before fitting the rear spoiler.
Guides (1) and retainers (2) must not be damaged.
Seal (3) must not be damaged.







Installation note:
Bolts (1) must not be damaged.

Replacement:
Remove rear spoiler trim.