Flywheel: Service and Repair

11 22 500 Removing And Installing Or Replacing Flywheel (N14)

Special tools required:







Necessary preliminary tasks:
- Remove transmission.
- Remove clutch.







Lock flywheel with special tool 11 9 590.







Flywheel for automatic transmission.
Release flywheel bolts (1).
Tightening torque: 11 22 1AZ.

Installation:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
Clean crankshaft thread for flywheel screws.







Flywheel for manual gearbox.
Flywheel with and without dual-mass: release flywheel bolts (1).
Tightening torque: 11 22 2AZ.

Installation:
Flywheel is secured with a dowel pin.

Replace flywheel bolts (1).
Clean crankshaft thread for flywheel screws.







Installation:
Sensor gear (1) is loose on crankshaft and is first secured to flywheel.
Dowel pin (2) for securing sensor gear/flywheel.







Assemble engine.