51 36 040 Removing and Installing/Replacing Strip on Rear Left or Right Side Window

51 36 040 Removing and installing/replacing strip on rear left or right side window







Unclip strip (1) from the clips (2) towards the top, beginning at the front.

Installation note:
Replace faulty clamps (2).
Strip (1) must be flush with the body in this area (A).







Pull off retaining strip (1) towards the front.
If necessary, remove remaining clips from retaining strip (1).

Installation note:
Mountings (2) on the retaining strip (1) must not be damaged.







Installation note:
Place the strip (1) preassembled with clips on the retaining strip (2) from the top and clip in.