Brakes - ABS Wiring Diagram, Manual Correction: Overview

9215mitsubishi01

NO.: TSB-91-35-008

DATE: December, 1991

MODEL: 1991-92 3000GT


SUBJECT: ABS WIRING DIAGRAM -
SERVICE MANUAL CORRECTION


TSB Revision TSB-91-35-008

PURPOSE

This technical service bulletin identifies two incorrectly numbered wiring connectors in the ABS wiring diagram of the 1991 and 1992 3000GT service manuals.

As a reference to this bulletin, write the TSB Revision number next to the corrections made on the wiring diagram.

AFFECTED SERVICE MANUALS

1991 3000GT, Volume 2, Wiring Diagram "B",
Section: Body Wiring Harness (RH) < B-2 >.

1992 3000GT, Volume 2, Wiring Diagram "4",
Section: Body Wiring Harness (RH) < 4-2 >.

DESCRIPTION

The pin numbers on the ABS control unit connector are incorrectly labeled in the wiring diagram, however, the coded colors shown for all wires in the connector are correct. Both FWD and AWD control unit connectors are affected. In the Circuit Diagrams section of the service manual, the correct pin numbers for the ABS control unit are used.

To avoid confusion when reading the wiring diagram, cross out the incorrectly labeled ABS control unit connectors and refer to the Circuit Diagrams section of the service manual for the correct pin numbers of the ABS control unit.