Transmission and Drivetrain: Technical Service Bulletins

• Recalls
  • Recall - Transfer Case Leakage
    • Overview
    • Procedures
      • A. Inspect Transfer Case
      • B. Re-Sealing Transfer Case
      • C. Installing Transfer Case
    • Owner Letter
• Customer Interest
  • Instruments - Speedometer Readings Higher Than Actual
  • A/T - Shift Delay Before Warm Up
• By Symptom
  • Abnormal wear/deterioration
    • M/T - Flywheel Surfacing Limit
  • Customer Interest
    • Instruments - Speedometer Readings Higher Than Actual
    • A/T - Shift Delay Before Warm Up
  • Erratic Shifting
    • A/T - Shift Delay Before Warm Up
  • False instrument warning light/gauges
    • Instruments - Speedometer Readings Higher Than Actual
  • Hard Shifting
    • A/T - Shift Delay Before Warm Up
  • Recalls
    • Recall - Transfer Case Leakage
      • Overview
      • Procedures
        • A. Inspect Transfer Case
        • B. Re-Sealing Transfer Case
        • C. Installing Transfer Case
      • Owner Letter
  • Slipping
    • A/T - Slipping or No-Shift/Metal Sealing Rings
  • Slipping clutch
    • M/T - Flywheel Surfacing Limit
  • Warping
    • M/T - Flywheel Surfacing Limit
• All Technical Service Bulletins
  • Rear Hub - Additional Removal Information
  • Recall - Transfer Case Leakage
    • Overview
    • Procedures
      • A. Inspect Transfer Case
      • B. Re-Sealing Transfer Case
      • C. Installing Transfer Case
    • Owner Letter
  • Instruments - Speedometer Readings Higher Than Actual
  • A/T Oil Cooler - Backflush Alternative
  • A/T - Perform Cooler Flow Test When Replacing A/T
  • Drivetrain - Driveshaft Servicing
  • CV Joint Boot - Replacement Tool/Installation
    • Overview
    • Procedures
  • A/T - Oil Pressure Testing Service Manual Revision
  • A/T - Cold Delay Shift
  • A/T - Shift Delay Before Warm Up
  • A/T - Remanufacturing Program.
    • Overview
    • Warranty/Non Warranty Repair
    • Remanufactured A/T Replacement Procedures
    • Remanufactured A/T Limited Warranty
    • Parts/Warranty Information
  • A/T, Remanufactured - Program Update
  • Transmission - Identification Codes
  • A/T - New End-Play and Preload Measurement
  • A/T - Engine Vacuum Testing
  • A/T - How To Use A Pressure Gauge
  • A/T - Intermittent Electrical Problems
  • A/T - Failsafe Modes
  • A/T - Drive Axle and Wheel Lug Nut Torque Specifications
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - Front Bushing Wear
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Part II
  • A/T - Choosing the Right ATF
  • M/T - Flywheel Surfacing Limit
  • Drive Axles - Axle Shaft Boot Kit Lubricant
  • Automatic Transaxle - Shift Characteristics of F4A
  • M/T Shift Lever - Operational Inspection Revision
  • M/T - Fluid Recommendation/Caution
  • M/T - Revised Clutch Interlock Switch Service Precaution