Owner Letter

June 25, 1996

Dear Mitsubishi Owner,

Mitsubishi Motor Sales of America, Inc. (MMSA) has determined that the under hood Vacuum Hose Routing Diagram (VHRD) label of your 1996 3000GT VR-4 may contain incorrect information. Accordingly, MMSA has announced a service campaign to correct this deficiency.

The VHRD on your vehicle is illustrated incorrectly. To correct this error, we have enclosed a revised VHRD label to be applied directly over the present label. We ask that you immediately install this label yourself, following the instructions listed. If preferred, you may also return to your authorized Mitsubishi Motors Dealer for installation at no charge. Note: Failure to perform this modification could result in additional expense or difficulty when registering your vehicle.






VHRD LABEL INSTALLATION INSTRUCTIONS

Open the hood and locate the VHRD label (see illustration). Carefully clean the old label. Remove the backing strip from the new label and place it over the existing label.

If you experience any difficulty with installation or have any questions concerning this campaign, please contact your nearest authorized Mitsubishi Motors Dealer.

We appreciate your cooperation in promptly installing this label, and apologize for any inconvenience this service campaign may cause you.