Inspection Using Scan Tool Data List And Actuator Testing

SENSOR READ TEST, INPUT STATE TEST, OUTPUT STATE TEST AND ACTUATOR TEST AND SPECIAL FUNCTION
1. Carry out inspection by means of the data list and the actuator test function.
If there is a malfunction, check and repair the chassis harnesses and components.
2. Re-check using the scan tool and check that the malfunction has been eliminated as a result of the repairs.
3. Erase the diagnostic trouble code from memory.
4. Remove the scan tool.
5. Start the engine again and carry out a road test to confirm that the problem has disappeared.

NOTE
Refer to for Sensor Read Tests.
Sensor Read Test
Refer to Input State Tests.
Input State Tests (Data List)
Refer to for Output State Tests.
Output State Tests (Data List)
Refer to for Actuator Tests.
Actuator Test Reference Table

CAUTION: If in the following condition, access the SPECIAL FUNCTION screen to the IAC.

In the following case, reset the AC.
- The throttle body or IAC motor has been replaced.
- The IAC motor related circuit has been opened during engine running or IAC motor operation test.