P Codes

P0100 - P0130:

P0135 - P0710:

P0715 - P1795:

NOTE: Do not replace the engine control module (ECM) [M/T] or powertrain control module (PCM) [A/T] until a through terminal check reveals there are no short/open circuits.

NOTE: Check that the ECM (or PCM) ground circuit is normal before checking for the cause of the problem.

NOTE: After the ECM (or PCM) detects a malfunction, a diagnostic trouble code is recorded the next time the engine is started and the same malfunction is re-detected. However for items marked with a "*," the diagnostic trouble code is recorded on the first detection of the malfunction.

NOTE: Sensor 1 indicates the sensor mounted at a position closest to the engine, and sensor 2 indicates the sensor mounted at the position second closest to the engine.