Suspension: Service and Repair

REMOVAL AND INSTALLATION





CAUTION: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle.

Removal Service Points
[A] Brake Caliper Assembly Removal
Secure the removed caliper assembly with wire, so that it does not fall.

[B] Crossmember Mounting Nut Removal





Support the crossmember with a garage jack or transmission jack to remove the crossmember mounting nut.

Installation Service Points
]A[ Stopper B/Stopper A Installation





1. Install stopper B in the shown direction.
2. Install stopper A in the shown direction while checking that the notches on stopper A are engaged with the projections on the trailing arm bushing.

INSPECTION
- Check crossmember for cracks or other damage.