Inspection Procedure 2

DIAGNOSIS
Step 1. Check The Excessive Clutch Pedal Play.
If faulty, adjust it. Then go to Step 9.
If normal, go to Step 2.

Step 2. Check The Clutch Disc For Distortion And Excessive Oscillation.
If faulty, replace it. Then go to Step 9.
If normal, go to Step 3.

Step 3. Check The Clutch Cover Assembly For Wear.
If faulty, replace it. Then go to Step 9.
If normal, go to Step 4.

Step 4. Check The Clutch Disc Spline For Wear And Corrosion.
If faulty, replace it. Then go to Step 9.
If normal, go to Step 5.

Step 5. Check The Clutch Disc Facing For Peeling.
If faulty, replace it. Then go to Step 9.
If normal, go to Step 6.

Step 6. Check The Clutch Release Bearing For Wear.
If faulty, replace it. Then go to Step 9.
If normal, go to Step 7.

Step 7. Check The Pressure Plate And Flywheel For Damage.
If faulty, replace it. Then go to Step 9.
If normal, go to Step 8.

Step 8. Check The Hydraulic System For Leakage, Air Mix And Clogging.
If faulty, repair or replace it. Then go to Step 9.

Step 9. Check Symptoms.
Check that the malfunction is eliminated.