Recall - A/T Shift Interlock Modification: Overview
No.: SR-08-004REVDATE: August, 2008
MODEL:
2004-05 Galant
SUBJECT:
GALANT SHIFT INTERLOCK SAFETY RECALL CAMPAIGN
This Safety Recall Bulletin supercedes SR-08-004, issued August, 2008, to Include Campaign Claim Information for "inspection only" claims. Revised information is shown with a < .
PURPOSE
On some affected vehicles, it may be possible for the key to be removed from the ignition switch when the transmission gear selector is in a position other than P (Park). The gearshift to ignition switch interlock system may allow the ignition key to be removed from the ignition switch without placing the gearshift in the "P" position. If the driver does not shift to "P" before removing the key from the ignition, and does not engage the parking brake, the vehicle could roll away and a crash could occur.
Follow the instructions in the Repair Procedure in this Safety Recall Bulletin to install a repair parts kit to eliminate this condition.
AFFECTED VEHICLES
2004-05 Galant
IMPORTANT:
Affected vehicles in dealer inventory must be repaired before the vehicle is sold. Dealers must check their inventory vehicle's VINs on the Warranty Super Screen to verify whether the vehicle is involved in this recall campaign.
CUSTOMER NOTIFICATION
A letter will be sent to all owners of affected vehicles telling them to bring their vehicle to their Mitsubishi Motors dealer to have repairs made to the shift interlock. A copy of the customer notification letter is shown in this bulletin.
PARTS AND EQUIPMENT
Each dealer will be shipped an initial quantity of parts based on sales of Affected Vehicles. Dealers should use the special "lock pin" that was supplied for SR-08-003 - Endeavor Shift Interlock Recall Campaign during repairs (a 2 mm drill bit can by used as an alternate). Refer to the PARTS INFORMATION section later in this bulletin for additional information.
REQUIRED OPERATIONS
Before starting this recall campaign procedure, CHECK THE WARRANTY SUPERSCREEN to verify that the vehicle is an affected VIN for this campaign and that this campaign procedure has not already been completed.
Install a new shift interlock lever and return spring provided in the repair kit, following the repair instructions in this Recall Bulletin.
PARTS INFORMATION
PARTS MANAGER: Refer to Parts Bulletin AI-GT-01-08 for additional details.
A supply of Shift Interlock Repair Kits will be allocated to each dealer. Determine your actual needs before ordering additional parts.
PARTS REQUIRED
RECALL CAMPAIGN CLAIM INFORMATION
Please follow the recall claim examples shown above.